Cat C280-8 Propulsion Engine
THE RUNDOWN
High Power Density
Continuous Service and Maximum Continuous ratings provide 2,300 to 3,000 bkW at 900 or 1,000 rpm, giving workboat operators a broad power range for demanding commercial propulsion applications.
Extreme Duty Design
Heavy-duty construction and marine-grade electronics are supported by thermal, overspeed, cold-start and emissions testing plus more than 350,000 field hours.
925 Hour Oil Service
A 925-hour oil-change interval, left- or right-hand service access, duplex fuel filters and a duplex centrifugal oil filter help simplify planned maintenance and support uptime.
ADEM IV Engine Controls
Caterpillar ADEM 4 electronic engine control modules manage governing, fuel delivery and engine operating parameters to support consistent operation and onboard monitoring.
Vessel Integration Options
Heat-exchanger or keel-cooled configurations, clockwise or counterclockwise rotation and left- or right-hand service availability help align the engine with vessel requirements.
Emissions Ready Ratings
Available ratings support IMO II or IMO III and U.S. EPA Tier 4 compliance, giving operators options for applicable emissions requirements. Select configurations require the appropriate aftertreatment system.
Power Rating
| Power Range | 3084-4023 bhp (2300-3000 bkW) |
Engine Specifications
| Application | Workboat |
| Speed Range | 900 - 1000 rpm |
| Emissions | IMO II, IMO III/EPA Tier 4 |
| Aspiration | TA |
| Bore | 11.0in |
| Stroke | 11.8in |
| Displacement | 9031.0in³ |
| Rotation from Flywheel End | Counterclockwise or clockwise |
| Configuration | In-line 8, 4-Stroke-Cycle Diesel |
Dimensions & Weights
| Height | 104.0in |
| Dry Weight | 41800.0lb |
| Width | 71.0in |
| Length | 195.0in |
Standard Equipment
General
- LH and RH service availability
Air Inlet System
- Aftercooler, fresh water, corrosion resistant coated (air side)
- Crankcase breathers, top mounted
- Single turbocharger, rear-mounted, engine oil lubricated
- Air inlet adapter - Straight / 90 degree / 35 degree
Control System
- Dual Caterpillar ADEM A4 Electronic Engine Control Modules
- Rigid Wiring Harness
- Aftercooler/oil cooler and jacket water pumps (gear driven)
Cooling System
- Engine coolant water drains
- Single Circuit / Separate Circuit Aftercooler
Exhaurt System
- Dry, gas tight, exhaust manifold
Exhaust System
- Turbo speed sensors - overspeed protection
Fuel System
- Fuel transfer pump, gear driven
- Duplex Fuel filters
- Electronically Controlled Unit Injectors
Instrumentation
- CAT Alarm & Protection System
Lube System
- Oil pump, gear driven
Lube Systems
- 2 element oil cooler, engine mounted
- Duplex centrifugal oil filter - engine mounted
- Prelube pump - air / electric
Protection System
- Crankcase explosion relief valves
Optional Equipment
Exhaust System
- Exhaust manifold shielding - soft
Cooling System
- Jacket Water Heaters
Fuel System
- SOLAS shielding
Lube System
- Front and rear oil pan drains
- Wet sump
- SOLAS shielding
Protection System
- Oil mist detector
- Cylinder pressure relief valves
- Cylinder pressure relief valves