C280-6 Propulsion Engine
THE RUNDOWN
Optimized Engine Design
Updated core components, aftercooler design and electronic controls increase power density and improve durability compared to previous C280 models, supporting productive operation and lower lifecycle demands
Optimized Engine Design
Extreme Duty Construction
Rigorous thermal, overspeed, cold-start and emissions testing, more than 7 million reported operating hours, heavy-duty construction and marine-hardened electronics support reliable operation in demanding environments.
Extreme Duty Construction
High Power Density
Flexible continuous service and maximum continuous ratings deliver 1,730–2,030 bkW at 900–1,000 rpm, with optimized torque at low speeds for varied commercial propulsion requirements.
High Power Density
Extended Service Intervals
Extended service intervals upto 1,400 hours on select configurations. Clear maintenance plans and Cat dealer support help reduce planned downtime and simplify lifecycle service.
Extended Service Intervals
ADEM IV Controls
Dual ADEM IV electronic control modules with a rigid wiring harness provide engine control and monitoring.
ADEM IV Controls
Cooling Flexibility
Cooling Flexibility
Heat exchanger or keel-cooled configurations, clockwise or counterclockwise rotation, and right- or left-hand service and water connection options help match vessel installation needs.
Power Rating
| Power Range | 2320-2722 bhp (1730-2030 bkW) |
Engine Specifications
| Application | Workboat |
| Speed Range | 900-1000 rpm |
| Emissions | IMO II |
| Aspiration | TA |
| Bore | 11.0in |
| Stroke | 11.8in |
| Displacement | 6773.0in³ |
| Rotation from Flywheel End | Counterclockwise or clockwise |
| Configuration | In-line 6, 4-Stroke-Cycle Diesel |
Dimensions & Weights
| Dry Weight | 34496.0lb |
| Length | 180.7in |
| Width | 81.7in |
| Height | 115.3in |
Standard Equipment
General
- LH or RH service connections
Air Inlet System
- Aftercooler, fresh water, corrosion resistant coating
- Crankcase breathers, top-mounted
- Single turbocharger, rear-mounted, engine oil lubricated
- Air inlet adapter - Straight / 90 degree / 35 degree
Control System
- Dual Caterpillar ADEM4 Electronic Engine Control Modules
- Rigid Wiring Harness
- Aftercooler / oil cooler and jacket water pumps (gear driven)
Cooling System
- Engine coolant water drains
- Combined Circuit / Separate Circuit Aftercooler
- Dry, gas tight exhaust manifold
Exhaust System
- Dry, gas tight, exhaust manifold
- Turbo speed sensors - overspeed protection
- Exhaust manifold shielding, soft
Fuel System
- Fuel transfer pump, gear driven
- Electronically Controlled Unit Injectors
Instrumentation
- CAT Alarm & Protection System
Lube System
- Oil pump, gear driven
Lube Systems
- 2 element oil cooler, engine mounted
- Duplex centrifugal oil filter-engine mounted
- Wet sump
- Prelube pump - air / electric
Protection System
- Crankcase explosion relief valves
Protection Ssystem
- Mounted oil mist detector
Optional Equipment
Fuel System
- Fuel priming pump
- Duplex fuel filters
- SOLAS shielding
Lube System
- Front and rear oil pan drains
- SOLAS shielding
Protection System
- Cylinder pressure relief valves